THK FLAT ROLLER FT4030-150
Model FT/FT-V
Specification Table⇒B-532
These models have a single row of rollers and
are mainly used on the flat surface.
THK FLAT ROLLER FT3525-75
Model FT/FT-V
Specification Table⇒B-532
These models have a single row of rollers and
are mainly used on the flat surface.
THK FLAT ROLLER FT3020-60
Model FT/FT-V
Specification Table⇒B-532
These models have a single row of rollers and
are mainly used on the flat surface.
THK FLAT ROLLER FT2515-45
Model FT/FT-V
Specification Table⇒B-532
These models have a single row of rollers and
are mainly used on the flat surface.
THK FLAT ROLLER FT2010-32
Model FT/FT-V
Specification Table⇒B-532
These models have a single row of rollers and
are mainly used on the flat surface.
THK LM ROLLER ACCESSORIES PA50
By attaching this spring pad to the
back of the LM Roller as shown in
Fig.2 (a) on A-614 . Turning the
adjustment bolt, adjustment of a
clearance and a preload can easily
be done.
THK LM ROLLER ACCESSORIES PA40
By attaching this spring pad to the
back of the LM Roller as shown in
Fig.2 (a) on A-614 . Turning the
adjustment bolt, adjustment of a
clearance and a preload can easily
be done.
THK LM ROLLER ACCESSORIES PA32
By attaching this spring pad to the
back of the LM Roller as shown in
Fig.2 (a) on A-614 . Turning the
adjustment bolt, adjustment of a
clearance and a preload can easily
be done.
THK LM ROLLER ACCESSORIES PA25
By attaching this spring pad to the
back of the LM Roller as shown in
Fig.2 (a) on A-614 . Turning the
adjustment bolt, adjustment of a
clearance and a preload can easily
be done.
THK LM ROLLER ACCESSORIES PA20
By attaching this spring pad to the
back of the LM Roller as shown in
Fig.2 (a) on A-614 . Turning the
adjustment bolt, adjustment of a
clearance and a preload can easily
be done.
THK LM ROLLER ACCESSORIES PA15
By attaching this spring pad to the
back of the LM Roller as shown in
Fig.2 (a) on A-614 . Turning the
adjustment bolt, adjustment of a
clearance and a preload can easily
be done.
THK LM ROLLER LRU76.2
Model LRB
Specification Table⇒B-526
Since this model does not require a groove on
the mounting surface, man-hours for machining
can be reduced. It can be mounted using fixture
model SMB or SE and bolts.
Model LRB-Z
Specification Table⇒B-526
A lighter type that uses a resin retainer and is
designed to be mounted in the same manner as
model LRB. Since it has a groove for installing a
seal, a special rubber seal with a high contami
nation protection effect can easily be attached.
In addition, this model is capable of high-speed
traveling at 1 m/s.
